Description
Please note: This unique product features a special steel-finish coating which weathers naturally and creates a rusty effect over time (approximately 1-2 months depending on rainfall). The product will have a metallic-finish on arrival which will then rust over time.
EverEdge Classic Cor-Ten metal lawn edging has been designed to keep lawns, paths, driveways, flower beds or other landscaped areas, neat and immaculate. When it comes to metal border edging for gardens, Cor-Ten is a highly attractive and practical solution.
The strength of the steel is not affected due to the rust sitting on top the metal, therefore protecting it against the elements.
Gallery
Advisories:
- As EverEdge overlaps and interlocks, please remember to add 6% to your actual requirement - that is 6cm per metre of EverEdge you use.
- Cor-Ten steel and Galvanised steel can have sharp edges and extra care must be taken when installing these products in properties with children or pets. If you would like advice on whether these finishes are suitable for your garden please call us on 01952 641949.
The installation of EverEdge can be made even easier with our Lawn Edging Irons.
Dimensions
- Length - 1 metre lengths that come in a pack 5 x 1 m strips
- Heights - 100 mm (4"), 125 mm (5") and 150mm (5.9") excludes spikes
- Thickness - 1.6 mm
Easy to Install, No Maintenance
EverEdge is very easy to install. Once a neat edge has been created, the only tools you will need are a heavy hammer or mallet, a screwdriver and a block of wood. EverEdge is engineered from 1.6mm gauge galvanised mild steel, coated with corrosion-resistant black paint finish. So once it's installed, it's maintenance-free.
To anchor EverEdge securely in poor ground conditions, use the
Pin & Sleeve System.
Installation
- It is important to form either a new edge or to re-cut your existing edge. This can be straight or curved.
- Place EverEdge where required. Take a block of wood and place on top of the EverEdge and hammer in to the ground to approximately 15mm below your cut grass level. Curve or bend EverEdge as required.
- Link EverEdge by locking on to the previous piece. There is also a tongue below the locking piece which should be pushed through the hole with a screwdriver.
For further information on EverEdge Cor-Ten, please contact a member of the sales team on 01952 897917
Find more information in our guide How To Install Lawn Edging